This article is going to go over the steps I suggest to take in order to setup a ViciDial Cluster. I do things a little different when it comes to this to prepare for worst case scenario that a server may have problems and have to be taken offline, I install all services to each server, such as apache, mysql and asterisk this way if need be, they each can take on additional roles to cover for a server having to be taken out of production. Obviously this is going to assume you have ViciDial already installed on each server with all roles ready to go. To do so you can follow any one of my articles for scratch installs or you can just use an ISO to install of which I suggest using Vicibox v9.0.3 over V10 because of the issues with the V10 firewall and dynamic portal not working correctly, even if you do apply my fix, I find V9 to be more stable.
ViciDial Cluster
Step 1 – Install Vicidial on each server
As I said above, I suggest installing all services on each server and just leaving the ones not needed for each box, disabled until needed. So if you are using an ISO install instead of one of my scratch instructions, for the purpose on this article, lets say ViciBox v9.0.3. The first thing you need to do after loading v9 is to upgrade the operating system from Leap 15.1 to Leap 15.2 using these instructions, because Leap 15.1 is end of life(no more updates). After that use the command, vicibox-install and choose Y(yes) for the options shown in the picture below:
vicibox-install
Repeat this process on each server and then move on to step 2.
Step 2 – Turn off services not needed on each server role
Now we need to disable services not needed on each server to save on resources, but this way they are there if they are needed in the future.
DB Server: systemctl disable apache2;systemctl disable asterisk
Web Server: systemctl disable mysql;systemctl disable asterisk
Now we want to link them all together by running the install.pl script located in the source directory for vicidial, follow the following commands to get to and run it:
cd /usr/src/astguiclient/trunk
perl install.pl
Now follow the prompt and answer them accordingly. The pictures below will show the choices needed for each server role except make sure you set the IP for the DB server on all the rest instead of localhost.
DB Server and Web Server
DB Server
For the web server make sure you put the DB server IP instead of localhost
Asterisk Servers
Only use 5 and 7 on ONE asterisk server, not all, the rest put 123468
Make sure you only put 5 and 7 keepalives on one asterisk server, the rest you should only choose 123468.
Step 4 – Add them to the GUI for ViciDial
Now we need to add them into the GUI for Vicidial by going to Admin then servers
Go to Servers in the Admin area
Once you are here, click “Add a new server”
Once you are here, click “Add a new server”
Fill out the fields accordingly and click submit
Add a new server
Now for the DB and web server turn the options to N(no) where you see highlighted below:
Active server, Active Asterisk server and Active agent server set to N
Now reboot all servers and then check your reports page to make sure all servers are set to green like shown below
ViciDial Cluster
That’s all there is to it, not as hard as you thought it would be, right? If you have any questions feel free to join our live support on Skype:
I am carpenox from the Vicidial forums and I enjoy helping our community, of which I do free of charge, however my one on one time helping people out I do have to charge for my time in order to keep this going. If my articles have helped you out and you’re making money now because of my help, please think about donating to the cause so I can keep this blog going. Here is a link to donate through PayPal.
How to – use one dynamic portal for whitelisting and have it sync across an entire cluster
This article will go over a method I have recently come up with in order to have your agents sign in through one dynamic portal and have their IP validated across all servers in the cluster.
Step 1 – Generate a SSH key
In your linux cli simply type “ssh-keygen” and just press enter for all default values with no password as shown below
ssh-keygen
Step 2 – copy the ssh key to the other servers you need it synced to
ssh-copy-id -i ~/.ssh/id_rsa.pub 192.168.80.121 (replace IP with the servers Ip’s as you do each one)
Type yes and then enter the servers root password, do these steps for each server in your cluster
ssh-copy-id -i ~/.ssh/id_rsa.pub 192.168.80.121
Step 3 – rsync the Dynamic IP firewall list to the other servers
Replace the IP’s with each one in your cluster and repeat this step for each
Vicibox9 users use this command: /usr/bin/rsync -a -e “ssh” /tmp/VB-DYNAMIC-tmp root@192.168.80.121:/tmp/
Vicibox10 users use this one: /usr/bin/rsync -a -e “ssh” /tmp/dynamiclist-add-tmp root@192.168.80.121:/tmp/
/usr/bin/rsync -a -e “ssh” /tmp/dynamiclist-add-tmp root@192.168.80.121:/tmp/
Step 4 – Now add a cronjob to have this done every minute with one line for each server as shown below
cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar xzf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install
dnf --enablerepo=powertools install libsrtp-devel -y
yum install -y elfutils-libelf-devel libedit-devel
cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install
cd /usr/src/
wget https://digip.org/jansson/releases/jansson-2.13.tar.gz
tar xvzf jansson*
cd jansson-2.13
./configure
make clean
make
make install
ldconfig
UPDATE: 6/22/21 - Ty @Ankit for catching the wrong directiory below
cd /usr/src/
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
tar xzf dahdi*
cd /usr/src/dahdi-linux-complete-3.1.0+3.1.0/
nano /usr/src/dahdi-linux-complete-3.1.0+3.1.0/linux/include/dahdi/kernel.h
remove #include: </linux/pci-aspm.h>
make
make install
make install-config
(if you get an error here about 4.18.0-305.7.1.el8_4.x86_64 missing then do "yum install *4.18.0-305.7.1.el8_4.x86_64")
yum install dahdi-tools-libs
cd tools
make clean
make
make install
make install-config
if it gives an error /usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
edit the file "system.conf.sample" in "system.conf"
cd /usr/src/
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.0.tar.gz
tar xzf libpri-1.6.0.tar.gz
cd /usr/src/libpri-1.6.0
make clean
make
make install
nano /etc/php.ini
error_reporting = E_ALL & ~E_NOTICE
memory_limit = 128M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 100M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = Europe/Rome
cd /usr/src/
wget http://download.vicidial.com/required-apps/asterisk-13.29.2-vici.tar.gz
tar xzf asterisk-13.29.2-vici.tar.gz
cd /usr/src/asterisk-13.29.2/
./configure --libdir=/usr/lib64 --with-pjproject-bundled -with-jansson-bundled
make clean
make menuselect ; ####### select "app_meetme" "res_http_websocket" and "res_srtp"
make
make install
make samples
make config
mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk
mysql
SET GLOBAL connect_timeout=60;
CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER 'cron'@'localhost' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@'%' IDENTIFIED BY '1234';
CREATE USER 'custom'@'localhost' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@'%' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@localhost IDENTIFIED BY 'custom1234';
GRANT RELOAD ON *.* TO cron@'%';
GRANT RELOAD ON *.* TO cron@localhost;
GRANT RELOAD ON *.* TO custom@'%';
GRANT RELOAD ON *.* TO custom@localhost;
flush privileges;
use asterisk;
\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
ALTER TABLE phones ALTER template_id SET DEFAULT '';
quit
cd /usr/src/astguiclient/trunk
perl install.pl
*Within the install.pl script make sure you Copy Asterisk Settings=Yes + Server webroot path=/var/www/html
nano /etc/rc.local
### paste this below:
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### start up the MySQL server
systemctl restart mariadb.service
### start up the apache web server
systemctl restart apache2
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20
### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl
type "crontab -e"
### paste below:
### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl --MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl --quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl
### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name "screenlog.0*" -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl --purge-non-cb -q
### GMT adjust script - uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q --override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl
nano /etc/httpd/conf.d/record.conf
Alias /RECORDINGS/ "/var/spool/asterisk/monitorDONE/"
<Directory "/var/spool/asterisk/monitorDONE">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
Require all granted
<files *.mp3>
Forcetype application/forcedownload
</files>
</Directory>
for synchronization problems:
yourserverip/vicidial/admin.php
go to Admin-> Servers-> update Asterisk Version: 13.29.2-vici
This article will go over how to scratch install Vicidial on AlmaLinux 8.6 -:- Special thanks to https://zestvoip.com/ and https://zenithbsolutions.com/ for testing this out. You can also use the Video tutorial at the bottom created by HBtutorials
IMPORTANT UPDATE: Alma changed one of the dependency packages and the normal install doesn’t work anymore, see the fix at the bottom.
cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar xzf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install
dnf --enablerepo=powertools install libsrtp-devel -y
yum install -y elfutils-libelf-devel libedit-devel
cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install
cd /usr/src/
wget https://digip.org/jansson/releases/jansson-2.13.tar.gz
tar xvzf jansson*
cd jansson-2.13
./configure
make clean
make
make install
ldconfig
UPDATE: 6/22/21 - Ty @Ankit for catching the wrong directory below
UPDATE: 8/2/23 - TY to Nik and Frank for fixing the install with the added lines I've put below for the dahdi install.
REBOOT!!
cd /usr/src/
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
tar xzf dahdi*
cd /usr/src/dahdi-linux-complete-3.2.0+3.2.0/
cd /usr/src
git clone -b next
git://git.asterisk.org/dahdi/linux
yum -y install kernel-devel-$(uname -r)
sudo sed -i 's|, 64);|);|g' /usr/src/dahdi-linux-complete-3.2.0+3.2.0/linux/drivers/dahdi/wctc4xxp/base.c
make
make install
make install-config
yum -y install dahdi-tools-libs
cd tools
make clean
make
make install
make install-config
cd /etc/dahdi
mv system.conf.sample system.conf
cd /usr/src/
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.0.tar.gz
tar xzf libpri-1.6.1.tar.gz
cd /usr/src/libpri-1.6.0
make clean
make
make install
nano /etc/php.ini
error_reporting = E_ALL & ~E_NOTICE
memory_limit = 128M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 100M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = America/New_York
cd /usr/src/
wget http://download.vicidial.com/required-apps/asterisk-13.29.2-vici.tar.gz
tar xzf asterisk-13.29.2-vici.tar.gz
cd /usr/src/asterisk-13.29.2/
./configure --libdir=/usr/lib64 --with-pjproject-bundled -with-jansson-bundled
make clean
make menuselect ; ####### select chan_meetme
make
make install
make samples
make config
mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk
mysql
SET GLOBAL connect_timeout=60;
CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER 'cron'@'localhost' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@'%' IDENTIFIED BY '1234';
CREATE USER 'custom'@'localhost' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@'%' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@localhost IDENTIFIED BY 'custom1234';
GRANT RELOAD ON *.* TO cron@'%';
GRANT RELOAD ON *.* TO cron@localhost;
GRANT RELOAD ON *.* TO custom@'%';
GRANT RELOAD ON *.* TO custom@localhost;
flush privileges;
use asterisk;
\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
ALTER TABLE phones ALTER template_id SET DEFAULT '';
quit
cd /usr/src/astguiclient/trunk
perl install.pl
*Within the install.pl script make sure you Copy Asterisk Settings=Yes + Server webroot path=/var/www/html
nano /etc/rc.d/rc.local
### paste this below:
#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.
touch /var/lock/subsys/local
# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2
# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown
### start up the MySQL server
systemctl restart mariadb.service
### start up the apache web server
systemctl restart apache2
### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl
### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl
### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv
### sleep for 20 seconds before launching Asterisk
sleep 20
### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl
type "crontab -e"
### paste below:
### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl --MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM
### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --cu3way
### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl
### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl
### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl
### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q
### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --only-qm-live-call-check
## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl --quiet
### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q
### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --debug
### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl
### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl
## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2
### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl
### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl
### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f
### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl
### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name "screenlog.0*" -mtime +4 -print | xargs rm -f
### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl --purge-non-cb -q
### GMT adjust script - uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --list-settings
### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q --override-24hours
### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl
systemctl enable httpd
##Install Sounds
cd /usr/src
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz
#Place the audio files in their proper places:
cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz
mkdir /var/lib/asterisk/mohmp3
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default
cd /var/lib/asterisk/mohmp3
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/moh
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/sounds
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/quiet-mp3
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25
nano /etc/httpd/conf.d/record.conf
Alias /RECORDINGS/ "/var/spool/asterisk/monitorDONE/"
<Directory "/var/spool/asterisk/monitorDONE">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
Require all granted
<files *.mp3>
Forcetype application/forcedownload
</files>
</Directory>
