Information

How to migrate from CentOS 8 to AlmaLinux 8.5(conversion)

Jan 4, 2022 carpenox 1 Comment

How to migrate from CentOS 8 to AlmaLinux (conversion)

I already wrote about migrating from CentOS 8 to Rocky Linux. Today, this quick post will list steps to convert existing VM or bare metal server from CentOS 8 to AlmaLinux 8.

WARNING! Make a backup before you start upgrading and the conversion procedure. I am an experienced Linux user, developer and sysadmin. However, there is no substitute for backups. Keep verified backups. Do not proceed further without backups. CyburDial is not responsible for data loss.

If you are doing this over an SSH session, I recommend running commands over GNU/screen or Tmux terminal multiplexer.

Migrating from CentOS 8 to AlmaLinux (conversion)

Log in as the root user:
sudo -i
Apply pending updates to CentOS 8 by running the dnf command/yum command:
dnf update

Apply pending updates before migration starts
Reboot the Linux box when new kernel updates are installed:
reboot
After reboot, you need to download the almalinux-deploy.sh script using the wget or curl command, type:
wget https://raw.githubusercontent.com/AlmaLinux/almalinux-deploy/master/almalinux-deploy.sh # read the script # vim almalinux-deploy.sh
Next set up executable permission using the chmod command, run:
chmod -v +x almalinux-deploy.sh

Downloading almalinux-deploy.sh script
Finally, migrate CentOS to AlmaLinux by typing the almalinux-deploy.sh:
./almalinux-deploy.sh
AlmaLinux migration tool in action
The upgrade and migration will take their own sweet time. It all depends upon your server hardware specification and the Internet speed. So wait and watch for errors on the screen. In the end, you should see a confirmation message as follows on screen:Complete! Run dnf distro-sync -y OK Restoring of alternatives is done OK Generating grub configuration file … done All Secure Boot related packages which were released by not AlmaLinux are reinstalledOK Migration to AlmaLinux is completed
Reboot the Linux box hosted at AWS or Linode:
shutdown -r now Connection to 3.1x.2xx.2xx closed by remote host.
Finally, verify the AlmaLinux version, run: cat /etc/redhat-release ## OR ## cat /etc/os-release

CentOS to Almalinux migration successfully executed
Also, make sure all services such as PGSQL, Apache and others are running using the ps command or ss command:
ss -tulpn | more ss -tulpn | grep ":80" # Verify logs using the tail command and dmesg command+egrep command # tail -f /var/log/httpd/app_name_goes_here dmesg | egrep -i 'error|critical|warn'

This will convert your centos8 system over to AlmaLinux

Last step is to recompile dahdi:

cd /usr/src/dahdi-linux-complete-3.1.0+3.1.0/

make && make install

modprobe dahdi

dahdi_cfg -v (to check no errors)

I hope this helps

-Carpenox aka Chris

Information

How to migrate from CentOS 8 to Rocky Linux (conversion)

Dec 31, 2021 carpenox 0 Comment

What is Rocky Linux?

Rocky Linux is an open-source operating system and one of the strongest replacement candidates for CentOS 8. It is a 100% binary-compatible release using the Red Hat Enterprise Linux (RHEL). Let us see how to migrate CentOS 8 Linux live server to Rocky Linux 8 using a shell script provided by the Rocky Linux project.

Step 1 – Backup CentOS 8

I started the migration process with backup. I do have nightly backups, but before upgrading, I made a snapshot to revert back when something goes wrong. In other words, keep verified backups.

Step 2 – Installing all updates on CentOS 8

Then I log in using the ssh command:
ssh user@cyburdial-php8-app1

Now, all we have to do is use the dnf command to apply all pending updates:
sudo dnf update

Finally, reboot the Linux box using the shutdown command or reboot command:
sudo reboot

Let us verify CentOS Linux 8 version using the cat command or more command/less command:
more /etc/centos-release

Step 3 – Installing git client on CentOS 8

We need git to install the migration script. Is git installed on the server? Let us find out. Execute the type command:
type -a git

Let us search for the git package, Execute:
dnf list git dnf search git dnf info git

Now, install git on your server with the help of the dnf utility, Execute:
sudo dnf install git type -a git

Clone the repo to install migration tool called rocky-tool

Finally, we need to clone the rocky-tools repo with the help of the git command:
cd /tmp/ git clone https://github.com/rocky-linux/rocky-tools.git
Getting ready for Rocky Linux migration

Step 4 – Migrating from CentOS 8 to Rocky Linux

Change the directory using cd command where rocky-tools cloned:
cd /tmp/rocky-tools/migrate2rocky
Set up executable permissions using the chmod command:
chmod -v +x migrate2rocky.sh
Start the migration from CentOS 8 to Rocky Linux by typing the migrate2rocky.sh command:
./migrate2rocky.sh -r
Follow on-screen instructions and wait for some time to finish the migration job. At the end you should see:Done, please reboot your system.
A log of this installation can be found at /var/log/migrate2rocky.log

Vicidial

How to – Scratch install Vicidial on RockyLinux 8.5

Dec 30, 2021 carpenox 0 Comment

How to – Scratch install Vicidial on RockyLinux 8.5

This article goes over how to install vicidial on RockyLinux 8

sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config

Set Default Editor to nano:
yum -y install nano

nano /etc/bashrc

Then add this line at the bottom:
export EDITOR="nano"

timedatectl set-timezone America/New_York


rc.local not work:

chmod +x /etc/rc.d/rc.local
systemctl enable rc-local
systemctl start rc-local
systemctl status rc-local

yum check-update
yum -y install epel-release
reboot

yum update -y
reboot

yum groupinstall "Development Tools" -y

reboot

yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
yum -y install http://rpms.remirepo.net/enterprise/remi-release-8.rpm
yum -y install yum-utils
dnf module enable php:remi-7.4


sudo dnf install -y mariadb-server

sudo dnf -y install dnf-plugins-core
sudo dnf config-manager --set-enabled powertools


yum install -y php php-mcrypt php-cli php-gd php-curl php-mysql php-ldap php-zip php-fileinfo php-opcache wget unzip make patch gcc gcc-c++ subversion php php-devel php-gd gd-devel readline-devel php-mbstring php-mcrypt php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel httpd libpcap libpcap-devel libnet ncurses ncurses-devel screen kernel* mutt glibc.i686 certbot python3-certbot-apache mod_ssl openssl-devel newt-devel libxml2-devel kernel-devel sqlite-devel libuuid-devel sox sendmail lame-devel htop iftop perl-File-Which php-opcache libss7 mariadb-devel libss7* libopen* 

systemctl start mariadb
mysql_secure_installation
systemctl enable mariadb

systemctl stop mariadb
cp /etc/my.cnf /etc/my.cnf.original
echo "" > /etc/my.cnf

nano /etc/my.cnf ; copy the below config to this file.

####################################################################################################

[mysql.server]
user = mysql
#basedir = /var/lib

[client]
port = 3306 
socket = /var/lib/mysql/mysql.sock

[mysqld]
datadir = /var/lib/mysql
#tmpdir = /home/mysql_tmp
socket = /var/lib/mysql/mysql.sock
user = mysql
old_passwords = 0
ft_min_word_len = 3
max_connections = 800
max_allowed_packet = 32M
skip-external-locking
sql_mode="NO_ENGINE_SUBSTITUTION"

log-error = /var/log/mysqld/mysqld.log

query-cache-type = 1
query-cache-size = 32M

long_query_time = 1
#slow_query_log = 1
#slow_query_log_file = /var/log/mysqld/slow-queries.log

tmp_table_size = 128M
table_cache = 1024

join_buffer_size = 1M
key_buffer = 512M
sort_buffer_size = 6M
read_buffer_size = 4M
read_rnd_buffer_size = 16M
myisam_sort_buffer_size = 64M

max_tmp_tables = 64

thread_cache_size = 8
thread_concurrency = 8

# If using replication, uncomment log-bin below
#log-bin = mysql-bin

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash

[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld_safe]
#log-error = /var/log/mysqld/mysqld.log
#pid-file = /var/run/mysqld/mysqld.pid

mkdir /var/log/mysqld
touch /var/log/mysqld/slow-queries.log
chown -R mysql:mysql /var/log/mysqld
systemctl restart mariadb

Install the Perl Modules
yum install -y perl-CPAN perl-YAML perl-libwww-perl perl-DBI perl-DBD-MySQL perl-GD perl-Env perl-Term-ReadLine-Gnu perl-SelfLoader perl-open.noarch

cpan -i Tk String::CRC Tk::TableMatrix Net::Address::IP::Local Term::ReadLine::Gnu Spreadsheet::Read Net::Address::IPv4::Local RPM::Specfile Spreadsheet::XLSX Spreadsheet::ReadSXC MD5 Digest::MD5 Digest::SHA1 Bundle::CPAN Pod::Usage Getopt::Long DBI DBD::mysql Net::Telnet Time::HiRes Net::Server Mail::Sendmail Unicode::Map Jcode Spreadsheet::WriteExcel OLE::Storage_Lite Proc::ProcessTable IO::Scalar Scalar::Util Spreadsheet::ParseExcel Archive::Zip Compress::Raw::Zlib Spreadsheet::XLSX Test::Tester Spreadsheet::ReadSXC Text::CSV Test::NoWarnings Text::CSV_PP File::Temp Text::CSV_XS Spreadsheet::Read LWP::UserAgent HTML::Entities HTML::Strip HTML::FormatText HTML::TreeBuilder Switch Time::Local Mail::POP3Client Mail::IMAPClient Mail::Message IO::Socket::SSL readline

cd /usr/bin/
curl -LOk http://xrl.us/cpanm
chmod +x cpanm


cpanm -f File::HomeDir
cpanm -f File::Which
cpanm CPAN::Meta::Requirements
cpanm -f CPAN
cpanm YAML
cpanm MD5
cpanm Digest::MD5
cpanm Digest::SHA1
cpanm readline


cpanm Bundle::CPAN
cpanm DBI
cpanm -f DBD::mysql
cpanm Net::Telnet
cpanm Time::HiRes
cpanm Net::Server
cpanm Switch
cpanm Mail::Sendmail
cpanm Unicode::Map
cpanm Jcode
cpanm Spreadsheet::WriteExcel
cpanm OLE::Storage_Lite
cpanm Proc::ProcessTable
cpanm IO::Scalar
cpanm Spreadsheet::ParseExcel
cpanm Curses
cpanm Getopt::Long
cpanm Net::Domain
cpanm Term::ReadKey
cpanm Term::ANSIColor
cpanm Spreadsheet::XLSX
cpanm Spreadsheet::Read
cpanm LWP::UserAgent
cpanm HTML::Entities
cpanm HTML::Strip
cpanm HTML::FormatText
cpanm HTML::TreeBuilder
cpanm Time::Local
cpanm MIME::Decoder
cpanm Mail::POP3Client
cpanm Mail::IMAPClient
cpanm Mail::Message
cpanm IO::Socket::SSL
cpanm MIME::Base64
cpanm MIME::QuotedPrint
cpanm Crypt::Eksblowfish::Bcrypt
cpanm Crypt::RC4
cpanm Text::CSV
cpanm Text::CSV_XS

cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar xzf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install 

dnf --enablerepo=powertools install libsrtp-devel -y
yum install -y elfutils-libelf-devel libedit-devel

cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install

cd /usr/src/
wget https://digip.org/jansson/releases/jansson-2.13.tar.gz
tar xvzf jansson*
cd jansson-2.13
./configure
make clean
make
make install 
ldconfig

UPDATE: 6/22/21 - Ty @Ankit for catching the wrong directiory below 

cd /usr/src/
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
tar xzf dahdi*
cd /usr/src/dahdi-linux-complete-3.1.0+3.1.0/
nano /usr/src/dahdi-linux-complete-3.1.0+3.1.0/linux/include/dahdi/kernel.h
remove #include: </linux/pci-aspm.h>
make
make install
make install-config
(if you get an error here about 4.18.0-305.7.1.el8_4.x86_64 missing then do "yum install *4.18.0-305.7.1.el8_4.x86_64")

yum install dahdi-tools-libs

cd tools
make clean
make
make install
make install-config

if it gives an error /usr/sbin/dahdi_cfg -vvvvvvvvvvvvv 
edit the file "system.conf.sample" in "system.conf"


cd /usr/src/
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.0.tar.gz
tar xzf libpri-1.6.0.tar.gz
cd /usr/src/libpri-1.6.0
make clean
make
make install

nano  /etc/php.ini
error_reporting  =  E_ALL & ~E_NOTICE
memory_limit = 128M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 100M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = Europe/Rome

cd /usr/src/
wget http://download.vicidial.com/required-apps/asterisk-13.29.2-vici.tar.gz
tar xzf asterisk-13.29.2-vici.tar.gz
cd /usr/src/asterisk-13.29.2/
./configure --libdir=/usr/lib64 --with-pjproject-bundled -with-jansson-bundled
make clean
make menuselect    ; ####### select "app_meetme" "res_http_websocket" and "res_srtp"
make
make install
make samples
make config


mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk


mysql
SET GLOBAL connect_timeout=60;
CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER 'cron'@'localhost' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@'%' IDENTIFIED BY '1234';
CREATE USER 'custom'@'localhost' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@'%' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@localhost IDENTIFIED BY 'custom1234';
GRANT RELOAD ON *.* TO cron@'%';
GRANT RELOAD ON *.* TO cron@localhost;
GRANT RELOAD ON *.* TO custom@'%';
GRANT RELOAD ON *.* TO custom@localhost;
flush privileges;
use asterisk;
\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
ALTER TABLE phones ALTER template_id SET DEFAULT '';
quit

cd /usr/src/astguiclient/trunk

perl install.pl


*Within the install.pl script make sure you Copy Asterisk Settings=Yes + Server webroot path=/var/www/html

/usr/share/astguiclient/ADMIN_area_code_populate.pl
/usr/share/astguiclient/ADMIN_update_server_ip.pl --old-server_ip=10.10.10.15

nano /etc/rc.local

### paste this below: 

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2

# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown

### start up the MySQL server
systemctl restart mariadb.service

### start up the apache web server
systemctl restart apache2

### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl

### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl

### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv

### sleep for 20 seconds before launching Asterisk
sleep 20

### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl

type "crontab -e"

### paste below:

### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl --MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM

### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --cu3way

### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl

### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl

### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl

### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q

### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --only-qm-live-call-check

## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl --quiet

### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q

### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --debug

### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl

### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl

## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2

### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl

### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl

### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f

### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl

### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name "screenlog.0*" -mtime +4 -print | xargs rm -f

### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl --purge-non-cb -q

### GMT adjust script - uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --list-settings

### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q --override-24hours

### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl

nano /etc/httpd/conf.d/record.conf

Alias /RECORDINGS/ "/var/spool/asterisk/monitorDONE/"

<Directory "/var/spool/asterisk/monitorDONE">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    Require all granted 
        <files *.mp3>
            Forcetype application/forcedownload
        </files>
</Directory>

for synchronization problems:

yourserverip/vicidial/admin.php

go to Admin-> Servers-> update Asterisk Version: 13.29.2-vici

Video Version from HBTutorials

Vicidial

How to – Scratch install Vicidial on AlmaLinux

Nov 16, 2021 carpenox 2 Comment

How to – Scratch install Vicidial on AlmaLinux

This article will go over how to scratch install Vicidial on AlmaLinux 8.6 -:- Special thanks to https://zestvoip.com/ and https://zenithbsolutions.com/ for testing this out. You can also use the Video tutorial at the bottom created by HBtutorials

IMPORTANT UPDATE: Alma changed one of the dependency packages and the normal install doesn’t work anymore, see the fix at the bottom.

sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config

Set Default Editor to nano:
yum -y install nano

nano /etc/bashrc

Then add this line at the bottom:
export EDITOR="nano"

timedatectl set-timezone America/New_York


rc.local not work:

chmod +x /etc/rc.d/rc.local
systemctl enable rc-local
systemctl start rc-local
systemctl status rc-local

yum check-update
yum -y install epel-release
yum update -y
yum groupinstall "Development Tools" -y

yum -y install https://dl.fedoraproject.org/pub/epel/epel-release-latest-8.noarch.rpm
yum -y install http://rpms.remirepo.net/enterprise/remi-release-8.rpm
yum -y install yum-utils
dnf -y module enable php:remi-7.4

sudo dnf install -y mariadb-server

sudo dnf -y install dnf-plugins-core
sudo dnf config-manager --set-enabled powertools

yum install -y php php-mcrypt php-cli php-gd php-curl php-mysql php-ldap php-zip php-fileinfo php-opcache wget unzip make patch gcc gcc-c++ subversion php php-devel php-gd gd-devel readline-devel php-mbstring php-mcrypt php-imap php-ldap php-mysql php-odbc php-pear php-xml php-xmlrpc curl curl-devel perl-libwww-perl ImageMagick libxml2 libxml2-devel httpd libpcap libpcap-devel libnet ncurses ncurses-devel screen kernel* mutt glibc.i686 certbot python3-certbot-apache mod_ssl openssl-devel newt-devel libxml2-devel kernel-devel sqlite-devel libuuid-devel sox sendmail lame-devel htop iftop perl-File-Which php-opcache libss7 mariadb-devel libss7* libopen* 

systemctl enable mariadb

cp /etc/my.cnf /etc/my.cnf.original
echo "" > /etc/my.cnf

nano /etc/my.cnf ; copy the below config to this file.

####################################################################################################

[mysql.server]
user = mysql
#basedir = /var/lib

[client]
port = 3306
socket = /var/lib/mysql/mysql.sock

[mysqld]
datadir = /var/lib/mysql
#tmpdir = /home/mysql_tmp
socket = /var/lib/mysql/mysql.sock
user = mysql
old_passwords = 0
ft_min_word_len = 3
max_connections = 800
max_allowed_packet = 32M
skip-external-locking
sql_mode="NO_ENGINE_SUBSTITUTION"

log-error = /var/log/mysqld/mysqld.log

query-cache-type = 1
query-cache-size = 32M

long_query_time = 1
#slow_query_log = 1
#slow_query_log_file = /var/log/mysqld/slow-queries.log

tmp_table_size = 128M
table_cache = 1024

join_buffer_size = 1M
key_buffer = 512M
sort_buffer_size = 6M
read_buffer_size = 4M
read_rnd_buffer_size = 16M
myisam_sort_buffer_size = 64M

max_tmp_tables = 64

thread_cache_size = 8
thread_concurrency = 8

# If using replication, uncomment log-bin below
#log-bin = mysql-bin

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash

[isamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 256M
sort_buffer_size = 256M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld_safe]
#log-error = /var/log/mysqld/mysqld.log
#pid-file = /var/run/mysqld/mysqld.pid

mkdir /var/log/mysqld
touch /var/log/mysqld/slow-queries.log
chown -R mysql:mysql /var/log/mysqld
systemctl restart mariadb

Install the Perl Modules
yum install -y perl-CPAN perl-YAML perl-libwww-perl perl-DBI perl-DBD-MySQL perl-GD perl-Env perl-Term-ReadLine-Gnu perl-SelfLoader perl-open.noarch

cpan -i Tk String::CRC Tk::TableMatrix Net::Address::IP::Local Term::ReadLine::Gnu Spreadsheet::Read Net::Address::IPv4::Local RPM::Specfile Spreadsheet::XLSX Spreadsheet::ReadSXC MD5 Digest::MD5 Digest::SHA1 Bundle::CPAN Pod::Usage Getopt::Long DBI DBD::mysql Net::Telnet Time::HiRes Net::Server Mail::Sendmail Unicode::Map Jcode Spreadsheet::WriteExcel OLE::Storage_Lite Proc::ProcessTable IO::Scalar Scalar::Util Spreadsheet::ParseExcel Archive::Zip Compress::Raw::Zlib Spreadsheet::XLSX Test::Tester Spreadsheet::ReadSXC Text::CSV Test::NoWarnings Text::CSV_PP File::Temp Text::CSV_XS Spreadsheet::Read LWP::UserAgent HTML::Entities HTML::Strip HTML::FormatText HTML::TreeBuilder Switch Time::Local Mail::POP3Client Mail::IMAPClient Mail::Message IO::Socket::SSL readline

cd /usr/bin/
curl -LOk http://xrl.us/cpanm
chmod +x cpanm


cpanm -f File::HomeDir
cpanm -f File::Which
cpanm CPAN::Meta::Requirements
cpanm -f CPAN
cpanm YAML
cpanm MD5
cpanm Digest::MD5
cpanm Digest::SHA1
cpanm readline


cpanm Bundle::CPAN
cpanm DBI
cpanm -f DBD::mysql
cpanm Net::Telnet
cpanm Time::HiRes
cpanm Net::Server
cpanm Switch
cpanm Mail::Sendmail
cpanm Unicode::Map
cpanm Jcode
cpanm Spreadsheet::WriteExcel
cpanm OLE::Storage_Lite
cpanm Proc::ProcessTable
cpanm IO::Scalar
cpanm Spreadsheet::ParseExcel
cpanm Curses
cpanm Getopt::Long
cpanm Net::Domain
cpanm Term::ReadKey
cpanm Term::ANSIColor
cpanm Spreadsheet::XLSX
cpanm Spreadsheet::Read
cpanm LWP::UserAgent
cpanm HTML::Entities
cpanm HTML::Strip
cpanm HTML::FormatText
cpanm HTML::TreeBuilder
cpanm Time::Local
cpanm MIME::Decoder
cpanm Mail::POP3Client
cpanm Mail::IMAPClient
cpanm Mail::Message
cpanm IO::Socket::SSL
cpanm MIME::Base64
cpanm MIME::QuotedPrint
cpanm Crypt::Eksblowfish::Bcrypt
cpanm Crypt::RC4
cpanm Text::CSV
cpanm Text::CSV_XS

cd /usr/src
wget http://download.vicidial.com/required-apps/asterisk-perl-0.08.tar.gz
tar xzf asterisk-perl-0.08.tar.gz
cd asterisk-perl-0.08
perl Makefile.PL
make all
make install 

dnf --enablerepo=powertools install libsrtp-devel -y
yum install -y elfutils-libelf-devel libedit-devel

cd /usr/src
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar -zxf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure
make
make install

cd /usr/src/
wget https://digip.org/jansson/releases/jansson-2.13.tar.gz
tar xvzf jansson*
cd jansson-2.13
./configure
make clean
make
make install 
ldconfig

UPDATE: 6/22/21 - Ty @Ankit for catching the wrong directory below 

UPDATE: 8/2/23 - TY to Nik and Frank for fixing the install with the added lines I've put below for the dahdi install.

REBOOT!!

cd /usr/src/
wget https://downloads.asterisk.org/pub/telephony/dahdi-linux-complete/dahdi-linux-complete-current.tar.gz
tar xzf dahdi*
cd /usr/src/dahdi-linux-complete-3.2.0+3.2.0/
cd /usr/src
git clone -b next 
git://git.asterisk.org/dahdi/linux


yum -y install kernel-devel-$(uname -r)

sudo sed -i 's|, 64);|);|g' /usr/src/dahdi-linux-complete-3.2.0+3.2.0/linux/drivers/dahdi/wctc4xxp/base.c

make
make install
make install-config

yum -y install dahdi-tools-libs

cd tools
make clean
make
make install
make install-config

cd /etc/dahdi
mv system.conf.sample system.conf


cd /usr/src/
wget http://downloads.asterisk.org/pub/telephony/libpri/libpri-1.6.0.tar.gz
tar xzf libpri-1.6.1.tar.gz
cd /usr/src/libpri-1.6.0
make clean
make
make install

nano  /etc/php.ini
error_reporting  =  E_ALL & ~E_NOTICE
memory_limit = 128M
short_open_tag = On
max_execution_time = 330
max_input_time = 360
post_max_size = 100M
upload_max_filesize = 42M
default_socket_timeout = 360
date.timezone = America/New_York

cd /usr/src/
wget http://download.vicidial.com/required-apps/asterisk-13.29.2-vici.tar.gz
tar xzf asterisk-13.29.2-vici.tar.gz
cd /usr/src/asterisk-13.29.2/
./configure --libdir=/usr/lib64 --with-pjproject-bundled -with-jansson-bundled
make clean
make menuselect    ; ####### select chan_meetme 
make
make install
make samples
make config


mkdir /usr/src/astguiclient
cd /usr/src/astguiclient
svn checkout svn://svn.eflo.net:3690/agc_2-X/trunk


mysql
SET GLOBAL connect_timeout=60;
CREATE DATABASE `asterisk` DEFAULT CHARACTER SET utf8 COLLATE utf8_unicode_ci;
CREATE USER 'cron'@'localhost' IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@'%' IDENTIFIED BY '1234';
CREATE USER 'custom'@'localhost' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@'%' IDENTIFIED BY 'custom1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO cron@localhost IDENTIFIED BY '1234';
GRANT SELECT,INSERT,UPDATE,DELETE,LOCK TABLES on asterisk.* TO custom@localhost IDENTIFIED BY 'custom1234';
GRANT RELOAD ON *.* TO cron@'%';
GRANT RELOAD ON *.* TO cron@localhost;
GRANT RELOAD ON *.* TO custom@'%';
GRANT RELOAD ON *.* TO custom@localhost;
flush privileges;
use asterisk;
\. /usr/src/astguiclient/trunk/extras/MySQL_AST_CREATE_tables.sql
\. /usr/src/astguiclient/trunk/extras/first_server_install.sql
ALTER TABLE phones ALTER template_id SET DEFAULT '';
quit

cd /usr/src/astguiclient/trunk

perl install.pl


*Within the install.pl script make sure you Copy Asterisk Settings=Yes + Server webroot path=/var/www/html

/usr/share/astguiclient/ADMIN_area_code_populate.pl
/usr/share/astguiclient/ADMIN_update_server_ip.pl --old-server_ip=10.10.10.15

nano /etc/rc.d/rc.local

### paste this below: 

#!/bin/sh
#
# This script will be executed *after* all the other init scripts.
# You can put your own initialization stuff in here if you don't
# want to do the full Sys V style init stuff.

touch /var/lock/subsys/local

# OPTIONAL enable ip_relay(for same-machine trunking and blind monitoring)
/usr/share/astguiclient/ip_relay/relay_control start 2>/dev/null 1>&2

# Disable console blanking and powersaving
/usr/bin/setterm -blank
/usr/bin/setterm -powersave off
/usr/bin/setterm -powerdown

### start up the MySQL server
systemctl restart mariadb.service

### start up the apache web server
systemctl restart apache2

### roll the Asterisk logs upon reboot
/usr/share/astguiclient/ADMIN_restart_roll_logs.pl

### clear the server-related records from the database
/usr/share/astguiclient/AST_reset_mysql_vars.pl

### load dahdi drivers
modprobe dahdi
/usr/sbin/dahdi_cfg -vvvvvvvvvvvvv

### sleep for 20 seconds before launching Asterisk
sleep 20

### start up asterisk
/usr/share/astguiclient/start_asterisk_boot.pl

type "crontab -e"

### paste below:

### recording mixing/compressing/ftping scripts
#0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_mix.pl --MIX
0,3,6,9,12,15,18,21,24,27,30,33,36,39,42,45,48,51,54,57 * * * * /usr/share/astguiclient/AST_CRON_audio_1_move_VDonly.pl
1,4,7,10,13,16,19,22,25,28,31,34,37,40,43,46,49,52,55,58 * * * * /usr/share/astguiclient/AST_CRON_audio_2_compress.pl --GSM
#2,5,8,11,14,17,20,23,26,29,32,35,38,41,44,47,50,53,56,59 * * * * /usr/share/astguiclient/AST_CRON_audio_3_ftp.pl --GSM

### keepalive script for astguiclient processes
* * * * * /usr/share/astguiclient/ADMIN_keepalive_ALL.pl --cu3way

### kill Hangup script for Asterisk updaters
* * * * * /usr/share/astguiclient/AST_manager_kill_hung_congested.pl

### updater for voicemail
* * * * * /usr/share/astguiclient/AST_vm_update.pl

### updater for conference validator
* * * * * /usr/share/astguiclient/AST_conf_update.pl

### flush queue DB table every hour for entries older than 1 hour
11 * * * * /usr/share/astguiclient/AST_flush_DBqueue.pl -q

### fix the vicidial_agent_log once every hour and the full day run at night
33 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl
50 0 * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --last-24hours
## uncomment below if using QueueMetrics
#*/5 * * * * /usr/share/astguiclient/AST_cleanup_agent_log.pl --only-qm-live-call-check

## uncomment below if using Vtiger
#1 1 * * * /usr/share/astguiclient/Vtiger_optimize_all_tables.pl --quiet

### updater for VICIDIAL hopper
* * * * * /usr/share/astguiclient/AST_VDhopper.pl -q

### adjust the GMT offset for the leads in the vicidial_list table
1 1,7 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --debug

### reset several temporary-info tables in the database
2 1 * * * /usr/share/astguiclient/AST_reset_mysql_vars.pl

### optimize the database tables within the asterisk database
3 1 * * * /usr/share/astguiclient/AST_DB_optimize.pl

## adjust time on the server with ntp
30 * * * * /usr/sbin/ntpdate -u pool.ntp.org 2>/dev/null 1>&2

### VICIDIAL agent time log weekly and daily summary report generation
2 0 * * 0 /usr/share/astguiclient/AST_agent_week.pl
22 0 * * * /usr/share/astguiclient/AST_agent_day.pl

### VICIDIAL campaign export scripts (OPTIONAL)
#32 0 * * * /usr/share/astguiclient/AST_VDsales_export.pl
#42 0 * * * /usr/share/astguiclient/AST_sourceID_summary_export.pl

### remove old recordings more than 7 days old
#24 0 * * * /usr/bin/find /var/spool/asterisk/monitorDONE -maxdepth 2 -type f -mtime +7 -print | xargs rm -f

### roll logs monthly on high-volume dialing systems
#30 1 1 * * /usr/share/astguiclient/ADMIN_archive_log_tables.pl

### remove old vicidial logs and asterisk logs more than 2 days old
28 0 * * * /usr/bin/find /var/log/astguiclient -maxdepth 1 -type f -mtime +2 -print | xargs rm -f
29 0 * * * /usr/bin/find /var/log/asterisk -maxdepth 3 -type f -mtime +2 -print | xargs rm -f
30 0 * * * /usr/bin/find / -maxdepth 1 -name "screenlog.0*" -mtime +4 -print | xargs rm -f

### cleanup of the scheduled callback records
25 0 * * * /usr/share/astguiclient/AST_DB_dead_cb_purge.pl --purge-non-cb -q

### GMT adjust script - uncomment to enable
#45 0 * * * /usr/share/astguiclient/ADMIN_adjust_GMTnow_on_leads.pl --list-settings

### Dialer Inventory Report
1 7 * * * /usr/share/astguiclient/AST_dialer_inventory_snapshot.pl -q --override-24hours

### inbound email parser
* * * * * /usr/share/astguiclient/AST_inbound_email_parser.pl

systemctl enable httpd

##Install Sounds

cd /usr/src
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-core-sounds-en-gsm-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-ulaw-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-wav-current.tar.gz
wget http://downloads.digium.com/pub/telephony/sounds/asterisk-extra-sounds-en-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-gsm-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-ulaw-current.tar.gz
wget http://downloads.asterisk.org/pub/telephony/sounds/asterisk-moh-opsound-wav-current.tar.gz
#Place the audio files in their proper places:
cd /var/lib/asterisk/sounds
tar -zxf /usr/src/asterisk-core-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-core-sounds-en-wav-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-extra-sounds-en-wav-current.tar.gz
mkdir /var/lib/asterisk/mohmp3
mkdir /var/lib/asterisk/quiet-mp3
ln -s /var/lib/asterisk/mohmp3 /var/lib/asterisk/default
cd /var/lib/asterisk/mohmp3
tar -zxf /usr/src/asterisk-moh-opsound-gsm-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-ulaw-current.tar.gz
tar -zxf /usr/src/asterisk-moh-opsound-wav-current.tar.gz
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/moh
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/sounds
rm -f CHANGES*
rm -f LICENSE*
rm -f CREDITS*
cd /var/lib/asterisk/quiet-mp3
sox ../mohmp3/macroform-cold_day.wav macroform-cold_day.wav vol 0.25
sox ../mohmp3/macroform-cold_day.gsm macroform-cold_day.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-cold_day.ulaw -t ul macroform-cold_day.ulaw vol 0.25
sox ../mohmp3/macroform-robot_dity.wav macroform-robot_dity.wav vol 0.25
sox ../mohmp3/macroform-robot_dity.gsm macroform-robot_dity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-robot_dity.ulaw -t ul macroform-robot_dity.ulaw vol 0.25
sox ../mohmp3/macroform-the_simplicity.wav macroform-the_simplicity.wav vol 0.25
sox ../mohmp3/macroform-the_simplicity.gsm macroform-the_simplicity.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/macroform-the_simplicity.ulaw -t ul macroform-the_simplicity.ulaw vol 0.25
sox ../mohmp3/reno_project-system.wav reno_project-system.wav vol 0.25
sox ../mohmp3/reno_project-system.gsm reno_project-system.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/reno_project-system.ulaw -t ul reno_project-system.ulaw vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.wav manolo_camp-morning_coffee.wav vol 0.25
sox ../mohmp3/manolo_camp-morning_coffee.gsm manolo_camp-morning_coffee.gsm vol 0.25
sox -t ul -r 8000 -c 1 ../mohmp3/manolo_camp-morning_coffee.ulaw -t ul manolo_camp-morning_coffee.ulaw vol 0.25

nano /etc/httpd/conf.d/record.conf

Alias /RECORDINGS/ "/var/spool/asterisk/monitorDONE/"

<Directory "/var/spool/asterisk/monitorDONE">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
    Require all granted 
        <files *.mp3>
            Forcetype application/forcedownload
        </files>
</Directory>

Now make sure you install firewalld and the dynamic portal by going here: https://dialer.one/how-to-scratch-install-the-dynportal-on-centos/

If you have any problems feel free to stop by our live support channel on Skype

for synchronization problems:

yourserverip/vicidial/admin.php

go to Admin-> Servers-> update Asterisk Version: 13.29.2-vici

Reboot

I hope this helps

-Chris aka carpenox

Tag How To’s

How to migrate from CentOS 8 to AlmaLinux (conversion)

Migrating from CentOS 8 to AlmaLinux (conversion)

Last step is to recompile dahdi:

What is Rocky Linux?

Step 1 – Backup CentOS 8

Step 2 – Installing all updates on CentOS 8

Step 3 – Installing git client on CentOS 8

Clone the repo to install migration tool called rocky-tool

Step 4 – Migrating from CentOS 8 to Rocky Linux

How to – Scratch install Vicidial on RockyLinux 8.5

Video Version from HBTutorials

How to – Scratch install Vicidial on AlmaLinux

Video Version